All Outputs (78)

Improved design of a DC-DC converter in residential solar photovoltaic system. (2019)
Journal Article
DARAMEIČIKAS, M., MUHAMMAD-SUKKI, F., ABU-BAKAR, S.H., SELLAMI, N., BANI, N.A., MUHTAZARUDDIN, M.N., MUS'UD, A.A. and ARDILA-REY, J.A. 2019. Improved design of a DC-DC converter in residential solar photovoltaic system. International journal of power electronics and drive systems [online], 10(3), pages 1476-1782. Available from: https://doi.org/10.11591/ijpeds.v10.i3.pp1476-1482

With growing demand in renewable energy, solar photovoltaic (PV) technology is becoming more popular. A number of research has been carried out to increase the efficiency of the PV system. One of them is improving the Switch Mode Power Supplies (SMPS... Read More about Improved design of a DC-DC converter in residential solar photovoltaic system..

Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement. (2019)
Journal Article
AHMED, N., ASIM, T., MISHRA, R. and NSOM, B. 2019. Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 21-26. Available from: https://apscience.org/comadem/index.php/comadem/article/view/142

A Ventricular Inhaler Device (VID) is used as a quick-relief medication for treating wheezing and shortness of breath. VID uses Albuterol (a bronchodilator) to relax muscles and open airways. The flow distribution of Albuterol within the VID is the p... Read More about Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement..

Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste. (2019)
Journal Article
LIU, X., ASIM, T., ZHU, G., ZHANG, Y. and MISHRA, R. 2019. Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 11-19. Available from: https://apscience.org/comadem/index.php/comadem/article/view/148

In this article, investigations on the structural parameters and aerodynamic characteristics of the furnace arches of a small scale L-shaped flame incinerator for the disposal of rural solid waste are carried out. A novel configuration of furnace arc... Read More about Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste..

Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method. (2019)
Journal Article
LIU, X., ASIM, T., ZHU, G., ZHANG, Y. and MISHRA, R. 2019. Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 5-9. Available from: https://apscience.org/comadem/index.php/comadem/article/view/140

Clean fuel boilers often use natural gas and wood pellets as their primary fuel, which result in reduced emissions from the boiler. Accurate determination of the thermal efficiency of these boilers plays a vital role in appropriately controlling the... Read More about Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method..

Thermal characterization of commercial electric radiators. (2019)
Journal Article
ASIM, T., ZALA, K., MISHRA, R., CONOR, F., CONOR, S., MIAN, N. and NSOM, B. 2019. Thermal characterization of commercial electric radiators. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 27-31. Available from: https://apscience.org/comadem/index.php/comadem/article/view/143

Electric radiators with a storage element are commonly used to provide heating in cold weather. The thermal performance of an electric radiator is dependent on a number of key design features such as the core material, shape of radiator’s outer surfa... Read More about Thermal characterization of commercial electric radiators..

Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger. (2019)
Journal Article
AHMED, N., ASIM, T. and MISHRA, R. 2019. Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 39-57. Available from: https://apscience.org/comadem/index.php/comadem/article/view/147

Modern engines use turbocharger that provides the extra boost to the engines and hence helps in downsizing. Turbochargers comprise of the turbine stage, bearing housing and the compressor stage. Compressor Stage helps in providing compressed air to t... Read More about Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger..

Design for additive manufacturing and its effect on the performance characteristics of a control valve trim. (2019)
Journal Article
SINGH, D., CHARLTON, M., ASIM, T. and MISHRA, R. 2019. Design for additive manufacturing and its effect on the performance characteristics of a control valve trim. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 59-67. Available from: https://apscience.org/comadem/index.php/comadem/article/view/145

Additive Manufacturing methods have been gaining popularity over the traditional manufacturing methods in the past three decades due to shorter product development cycles and reduced manufacturing costs. Selective Laser Melting is one of the most pop... Read More about Design for additive manufacturing and its effect on the performance characteristics of a control valve trim..

Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques. (2019)
Journal Article
ZAHARIEV, M., ASIM, T., MISHRA, R. and NSOM, B. 2019. Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 69-74. Available from: https://apscience.org/comadem/index.php/comadem/article/view/146

Harnessing the wind energy effectively and efficiently, to fulfil the ever increasing energy demands, has long been an area of active research. This research study is aimed at exploring the blade design of a small-to-medium sized Savonius type Vertic... Read More about Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques..

Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. (2019)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and SAHARUDIN, M.S. 2019. Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. Nanomaterials [online], 9(7), article number 917. Available from: https://doi.org/10.3390/nano9070917

Efficient machining of the polyester nanocomposite components requires a better understanding of machinability characteristics of such material, which has become an urgent requirement for modern industrial production. In this research, the micro-mill... Read More about Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites..

Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades. (2019)
Journal Article
DROUBI, M.G., FOSBROOKE, C., MCCONNACHIE, J. and FAISAL, N.H. 2019. Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades. SN applied sciences [online], 1(7), article ID 691. Available from: https://doi.org/10.1007/s42452-019-0735-6

Wind turbine is a source of non-polluting renewable energy. Whether a wind turbine is viable depends entirely on the structural integrity of turbine blade. To assess the structural integrity of wind turbine blades it is necessary to investigate the l... Read More about Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades..

Hydrophobically associating polymers for enhanced oil recovery, part a: a review on the effects of some key reservoir conditions. (2019)
Journal Article
AFOLABI, R.O., OLUYEMI, G.F., OFFICER, S. and UGWU, J.O. 2019. Hydrophobically associating polymers for enhanced oil recovery, part a: a review on the effects of some key reservoir conditions. Journal of petroleum science and engineering [online], 180, pages 681-698. Available from: https://doi.org/10.1016/j.petrol.2019.06.016

Research advancement in polymer flooding for Enhanced Oil Recovery (EOR) has been growing over the last decade. This growth can be tied to increased funding towards the development of superior polymers such as hydrophobically associating polymers whe... Read More about Hydrophobically associating polymers for enhanced oil recovery, part a: a review on the effects of some key reservoir conditions..

Understanding, knowledge and perception of nanotechnology among private universities' students in Malaysia. (2019)
Journal Article
KARIM, M.E., AKHTER, S., MUNIR, A.B., MUHAMMAD-SUKKI, F., HOQUE, K.E., YASIN, S.H.M., ABU-BAKAR, S.S., ABU-BAKAR, S.H., BANI, N.A., WIRBA, A.V. and MAS'UD, A.A. 2019. Understanding, knowledge and perception of nanotechnology among private universities' students in Malaysia. Journal of advanced research in social and behavioural science [online], 15(1), pages 85-103. Available from: http://www.akademiabaru.com/doc/ARSBSV15_N1_P85_103.pdf

Modern day policy making demands to include citizens in the decision making process and this is crucial before the introduction of any emerging technology such as nanotechnology, the science and art of manipulating things at the atomic scale. Even th... Read More about Understanding, knowledge and perception of nanotechnology among private universities' students in Malaysia..

Casing structural integrity and failure modes in a range of well types: a review. (2019)
Journal Article
MOHAMMED, A.I., OYENEYIN, B., ATCHISON, B. and NJUGUNA, J. 2019. Casing structural integrity and failure modes in a range of well types: a review. Journal of natural gas science and engineering [online], 68, article ID 102898. Available from: https://doi.org/10.1016/j.jngse.2019.05.011

This paper focus on factors attributing to casing failure, their failure mechanism and the resulting failure mode. The casing is a critical component in a well and the main mechanical structural barrier element that provide conduits and avenue for oi... Read More about Casing structural integrity and failure modes in a range of well types: a review..

Recent advances in pipeline monitoring and oil leakage detection technologies: principles and approaches. (2019)
Journal Article
ADEGBOYE, M.A., FUNG, W.-K. and KARNIK, A. 2019. Recent advances in pipeline monitoring and oil leakage detection technologies: principles and approaches. Sensors [online], 19(11), article ID 2548. Available from: https://doi.org/10.3390/s19112548

Pipelines are widely used for the transportation of hydrocarbon fluids over millions of miles all over the world. The structures of the pipelines are designed to withstand several environmental loading conditions to ensure safe and reliable distribut... Read More about Recent advances in pipeline monitoring and oil leakage detection technologies: principles and approaches..

Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low density polyethylene nanocomposites. (2019)
Journal Article
SIDDIQUE, S., SMITH, G.D., YATES, K., MISHRA, A.K., MATTHEWS, K., CSETENYI, L.J. and NJUGUNA, J. 2019. Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low-density polyethylene nanocomposites. Journal of polymer research [online], 26, article ID 154. Available from: https://doi.org/10.1007/s10965-019-1802-9

In this study, a novel reclaimed clay nanofiller used to manufacture low-density polyethylene (LDPE)/Oil based mud fillers (OBMFs) nanocomposites by a melt compounding process. The mechanical testing samples were manufactured using injection mouldin... Read More about Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low density polyethylene nanocomposites..

Using static concentrator technology to achieve global energy goal. (2019)
Journal Article
ALAMOUDI, A., SAADUDDIN, S.M., MUNIR, A.B., MUHAMMAD-SUKKI, F., ABU-BAKAR, S.H., YASIN, S.H.M., KARIM, R., BANI, N.A., MAS'UD, A.A., ARDILA-REY, J.A., PRABHU, R. and SELLAMI, N. 2019. Using static concentrator technology to achieve global energy goal. Sustainability [online], 11(11), article ID 3056. Available from: https://doi.org/10.3390/su11113056

Solar energy has demonstrated promising prospects in satisfying energy requirements, specifically through solar photovoltaic (PV) technology. Despite that, the cost of installation is deemed as the main hurdle to the widespread uptake of solar PV sys... Read More about Using static concentrator technology to achieve global energy goal..

A fuzzy inference system applied to value of information assessment for oil and gas industry. (2019)
Journal Article
VILELA, M., OLUYEMI, G. and PETROVSKI, A. 2019. A fuzzy inference system applied to value of information assessment for oil and gas industry. Decision making: applications in management and engineering [online], 2(2), pages 1-18. Available from: https:// doi.org/10.31181/dmame1902001v

Value of information is a widely accepted methodology for evaluating the need to acquire new data in the oil and gas industry. In the conventional approach to estimating the value of information, the outcomes of a project assessment relate to the dec... Read More about A fuzzy inference system applied to value of information assessment for oil and gas industry..

The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing. (2019)
Journal Article
CHIKERE, C.O., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2019. The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing. Journal of solid state electrochemistry [online], 23(6), pages 1795-1809. Available from: https://doi.org/10.1007/s10008-019-04267-9

For the first time, the synergistic effect of graphene oxide nanocolloids (nano-GO) and silicon dioxide (silica) nanoparticles (SiO2-nanoparicles) has been used to modify a glassy carbon electrode (GCE) for the determination of gallic acid (GA). The... Read More about The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing..

Development of a control system for a domestic grid-connected wind turbine. (2019)
Journal Article
ADAMSON, M.A., MUHAMMAD-SUKKI, F., AZIZ, N.F.A., ABU-BAKAR, S.H., SELLAMI, N., IYI, D., RAMIREZ-INIGUEZ, R., BANI, N.A., MAS'UD, A.A., MUNIR, A.B. and YASIN, S.H.M. 2019. Development of a control system for a domestic grid-connected wind turbine. Journal of computational and theoretical nanoscience [online], 16(5-6), pages 2249-2258. Available from: https://doi.org/10.1166/jctn.2019.7881

In the United Kingdom (UK), homeowners who install grid connected renewable energy sources receive a threefold benefit. They can use the electricity generated by the source, they enjoy reduced household bills and they can also receive Feed-in Tariff... Read More about Development of a control system for a domestic grid-connected wind turbine..

The role of linked building data (LBD) in aligning augmented reality (AR) with sustainable construction (2019)
Journal Article
MUGUMYA, K.L., WONG, J.Y., CHAN, A. and YIP, C.-C. 2019. The role of linked building data (LBD) in aligning augmented reality (AR) with sustainable construction. International journal of innovative technology and exploring engineering [online], 8(6S4), pages 366-372. Available from: https://doi.org/10.35940/ijitee.F1074.0486S419

Over the years, the construction industry has been evolving to embrace the delicate balance between buildings and a sustainable environment by optimizing resource use to create greener and more energy efficient constructions. Sustainable building des... Read More about The role of linked building data (LBD) in aligning augmented reality (AR) with sustainable construction.