Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCL.

Praveen, B.M.; Alhadhrami, A.; Prasanna, B.M.; Hebbar, Narayana; Prabhu, Radhakrishna

doi:10.3390/coatings11080965

Promoting the solar industry in Ghana through effective Public-Private Partnership (PPP): some lessons from South Africa and Morocco. (2021)
Journal Article
AWUKU, S.A., BENNADJI, A., MUHAMMAD-SUKKI, F. and SELLAMI, N. 2022. Promoting the solar industry in Ghana through effective Public-Private Partnership (PPP): some lessons from South Africa and Morocco. Energies [online], 15(1), article 17. Available from: https://doi.org/10.3390/en15010017

Over the past decades, solar energy has gained much attention in Ghana, especially after the 2012–2016 power crisis. The government through Public-Private Partnerships (PPPs) has attempted to increase the shares of solar generation to augment its eff... Read More about Promoting the solar industry in Ghana through effective Public-Private Partnership (PPP): some lessons from South Africa and Morocco..

Experimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbine. (2021)
Journal Article
HAND, B.P., ERDOGAN, N., MURRAY, D., CRONIN, P., DORAN, J. and MURPHY, J. 2022. Experimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbine. Sustainable energy technologies and assessments [online], 50, article 101874. Available from: https://doi.org/10.1016/j.seta.2021.101874

Tidal energy has received considerable attention over the past decade due to its predictability and high power density. The research in the tidal turbine area has concentrated primarily on the improvement of the energy conversion efficiency. In contr... Read More about Experimental testing on the influence of shaft rotary lip seal misalignment for a marine hydro-kinetic turbine..

Determination of cure mechanism inside die for a part manufacturing during large-scale pultrusion. (2021)
Journal Article
MUKHERJI, A., TARAPORE, N. and NJUGUNA, J. 2022. Determination of cure mechanism inside die for a part manufacturing during large-scale pultrusion. Journal of applied polymer science [online], 139(17), article 52035. Available from: https://doi.org/10.1002/app.52035

The cure kinetics of resin, heat capacity and thermal conductivity of reinforcing materials of uncured mass dictates the ultimate curing of reinforced thermosets manufactured component. In this study, degree of conversion from heat capacity by ‘Lumry... Read More about Determination of cure mechanism inside die for a part manufacturing during large-scale pultrusion..

The combined effect of fluid rheology, inner pipe rotation and eccentricity on the flow of Newtonian and non-Newtonian fluid through the annuli. (2021)
Journal Article
SALUBI, V., MAHON, R. and OLUYEMI, G. 2022. The combined effect of fluid rheology, inner pipe rotation and eccentricity on the flow of Newtonian and non-Newtonian fluid through the annuli. Journal of petroleum science and engineering [online], 211, article 110018. Available from: https://doi.org/10.1016/j.petrol.2021.110018

The accurate prediction of the fluid dynamics and hydraulics of the axial or helical flow of non-Newtonian drilling fluids in the annuli is essential for the determination and effective management of wellbore pressure during drilling operations. Prev... Read More about The combined effect of fluid rheology, inner pipe rotation and eccentricity on the flow of Newtonian and non-Newtonian fluid through the annuli..

A review of sensing technologies for non-destructive evaluation of structural composite materials. (2021)
Journal Article
GUPTA, R., MITCHELL, D., BLANCHE, J., HARPER, S., TANG, W., PANCHOLI, K., BAINES, L., BUCKNALL, D.G. and FLYNN, D. 2021. A review of sensing technologies for non-destructive evaluation of structural composite materials. Journal of composites science [online], 5(12), article 319. Available from: https://doi.org/10.3390/jcs5120319

The growing demand and diversity in the application of industrial composites and the current inability of present non-destructive evaluation (NDE) methods to perform detailed inspection of these composites has motivated this comprehensive review of s... Read More about A review of sensing technologies for non-destructive evaluation of structural composite materials..

Machine learning methods for sign language recognition: a critical review and analysis. (2021)
Journal Article
ADEYANJU, I.A., BELLO, O.O. and ADEGBOYE, M.A. 2021. Machine learning methods for sign language recognition: a critical review and analysis. Intelligent systems with applications [online], 12, article 200056. Available from: https://doi.org/10.1016/j.iswa.2021.200056

Sign language is an essential tool to bridge the communication gap between normal and hearing-impaired people. However, the diversity of over 7000 present-day sign languages with variability in motion position, hand shape, and position of body parts... Read More about Machine learning methods for sign language recognition: a critical review and analysis..

Comparison of ceramic α-alumina and modified γ-alumina membranes for H2 separation. (2021)
Journal Article
ORAKWE, I., ALKALI, A., SHEHU, H. and GOBINA, E. 2021. Comparison of ceramic α-alumina and modified γ-alumina membranes for H2 separation. Membrane technology [online], 2021(11), pages 8-11. Available from: https://doi.org/10.1016/S0958-2118(21)00175-0

This article provides details of a study that investigates hydrogen (H2) separation, purification and transport behaviour of a ceramic α-alumina membrane and compares it with that of a γ-alumina membrane modified with Boehmite sol.

Crude glycerol as a potential feedstock for future energy via thermochemical conversion processes: a review. (2021)
Journal Article
RAZA, M., INAYAT, A. and ABU-JDAYIL, B. 2021. Crude glycerol as a potential feedstock for future energy via thermochemical conversion processes: a review. Sustainability [online], 13(22), article number 12813. Available from: https://doi.org/10.3390/su132212813

Biodiesel is an emerging substitute for petroleum-based products. It is considered an ecologically safe and sustainable fuel. The high cost of biodiesel production is linearly related to its feedstock. Crude glycerol, which is a by-product of the bio... Read More about Crude glycerol as a potential feedstock for future energy via thermochemical conversion processes: a review..

A blend of traditional visual symbols in BIPV application: any prospects? (2021)
Journal Article
AWUKU, S.A., BENNADJI, A., MUHAMMAD-SUKKI, F. and SELLAMI, N. 2021. A blend of traditional visual symbols in BIPV application: any prospects? Academia letters [online], article 4029. Available from: https://doi.org/10.20935/AL4029

Traditional visual symbols are of great relevance, especially within the architectural space. Buildings may adopt symbols to depict culture, iconicity or identity. The quest to meet sustainable building targets and avert the looming effects of climat... Read More about A blend of traditional visual symbols in BIPV application: any prospects?.

Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. (2021)
Journal Article
FAISAL, N.H., AHMED, R., PRATHURU, A.K., PARADOWSKA, A. and LEE, T.L. 2022. Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. Experimental mechanics [online], 62(3), pages 369-392. Available from: https://doi.org/10.1007/s11340-021-00803-9

Background: During thermal spray coating, residual strain is formed within the coating and substrates due to thermo-mechanical processes and microstructural phase changes. Objective: This paper provides a comprehensive guide to researchers planning t... Read More about Measuring residual strain and stress in thermal spray coatings using neutron diffractometers..

Myth or gold? The power of aesthetics in the adoption of building integrated photovoltaics (BIPVs). (2021)
Journal Article
AWUKU, S.A., BENNADJI, A., MUHAMMAD-SUKKI, F. and SELLAMI, N. 2021. Myth or gold? The power of aesthetics in the adoption of building integrated photovoltaics (BIPVs). Energy nexus [online], 4, article number 100021. Available from: https://doi.org/10.1016/j.nexus.2021.100021

BIPV has gained a lot of attention in the solar world especially in recent times as the push for Net Zero Energy Buildings (NZEB) and concerns about landscape aesthetics increases. Aesthetics plays a critical role in the adoption of BIPVs as it is on... Read More about Myth or gold? The power of aesthetics in the adoption of building integrated photovoltaics (BIPVs)..

Effects of damaged rotor on wake dynamics of vertical axis wind turbines. (2021)
Journal Article
ASIM, T. and ISLAM, S.Z. 2021. Effects of damaged rotor on wake dynamics of vertical axis wind turbines. Energies [online], 14(21), article 7060. Available from: https://doi.org/10.3390/en14217060

Vertical Axis Wind Turbines (VAWTs) are omni-directional turbomachines commonly used in rural areas for small-to-medium-scale power generation. The complex flow observed in the wake region of VAWTs is affected by a number of factors, such as rotor bl... Read More about Effects of damaged rotor on wake dynamics of vertical axis wind turbines..

Assessment of solar photovoltaic water pumping of WASA tube wells for irrigation in Quetta Valley aquifer. (2021)
Journal Article
KHAN, M.S., TAHIR, A., ALAM, I., RAZZAQ, S., USMAN, M., TAREEN, W.U.K., BAIG, N.A., ATIF, S. and RIAZ, M. 2021. Assessment of solar photovoltaic water pumping of WASA tube wells for irrigation in Quetta Valley aquifer. Energies [online], 14(20), article number 6676. Available from: https://doi.org/10.3390/en14206676

This paper investigates the impact of tube wells on the discharge and water table of the Quetta Valley aquifer and conducts a financial analysis of the solar photovoltaic water pumping system (SPVWP) in comparison with a typical pumping system for th... Read More about Assessment of solar photovoltaic water pumping of WASA tube wells for irrigation in Quetta Valley aquifer..

Progress of the pyrolyzer reactors and advanced technologies for biomass pyrolysis processing. (2021)
Journal Article
RAZA, M., INAYAT, A., AHMED, A., JAMIL, F., GHENAI, C., RAQVI, S.R., SHANABLEH, A., AYOUB, M., WARIS, A. and PARK, Y.-K. 2021. Progress of the pyrolyzer reactors and advanced technologies for biomass pyrolysis processing. Sustainability [online], 13(19), article number 11061. Available from: https://doi.org/10.3390/su131911061

In the future, renewable energy technologies will have a significant role in catering to energy security concerns and a safe environment. Among the various renewable energy sources available, biomass has high accessibility and is considered a carbon-... Read More about Progress of the pyrolyzer reactors and advanced technologies for biomass pyrolysis processing..

An integrated multi-objective optimization and multi-criteria decision-making model for optimal planning of workplace charging stations. (2021)
Journal Article
ERDOGAN, N., PAMUCAR, D., KUCUKSARI, S. and DEVECI, M. 2021. An integrated multi-objective optimization and multi-criteria decision-making model for optimal planning of workplace charging stations. Applied energy [online], 304, article 117866. Available from: https://doi.org/10.1016/j.apenergy.2021.117866

This study addresses the optimal planning of electric vehicle charging infrastructure at workplaces. As the optimal planning for a given workplace can involve various criteria that comprise conflicting single objectives, this study proposes a new int... Read More about An integrated multi-objective optimization and multi-criteria decision-making model for optimal planning of workplace charging stations..

A new approach for quantitative mapping of retention mechanisms of associative polymers in porous media. (2021)
Journal Article
AFOLABI, R.O., OLUYEMI, G.F., OFFICER, S. and UGWU, J.O. 2021. A new approach for quantitative mapping of retention mechanisms of associative polymers in porous media. Journal of molecular liquids [online], 343, article 117685. Available from: https://doi.org/10.1016/j.molliq.2021.117685

The retention of associative polymer molecules poses a significant challenge for its transport in porous media, and this arises due to the hydrophobic interactions that exists between the retained molecules. The known experimental approach in literat... Read More about A new approach for quantitative mapping of retention mechanisms of associative polymers in porous media..

Optical fibre-based sensors for oil and gas applications. (2021)
Journal Article
JOHNY, J., AMOS, S. and PRABHU, R. 2021. Optical fibre-based sensors for oil and gas applications. Sensors [online], 21(8), article 6047. Available from: https://doi.org/10.3390/s21186047

Oil and gas (O&G) explorations moving into deeper zones for enhanced oil and gas recovery are causing serious safety concerns across the world. The sensing of critical multiple parameters like high pressure, high temperature (HPHT), chemicals, etc.,... Read More about Optical fibre-based sensors for oil and gas applications..

Pulse train generation in a distributed gain fibre amplifier. (2021)
Journal Article
ATUBA, S. 2021. Pulse train generation in a distributed gain fibre amplifier. Results in optics [online], 5, pages 100136. Available from: https://doi.org/10.1016/j.rio.2021.100136

This work shows the generation of an array of chirped compressed periodic waves with distributed gain in a nonlinear fibre. In particular, with suitable tailoring of the gain to vary along the longitudinal distance while the dispersion and nonlineari... Read More about Pulse train generation in a distributed gain fibre amplifier..

An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation. (2021)
Journal Article
MOHAMMED, A.I., BARTLETT, M., OYENEYIN, B., KAYVANTASH, K. and NJUGUNA, J. 2021. An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation. Journal of natural gas science and engineering [online], 95, article 104221. Available from: https://doi.org/10.1016/j.jngse.2021.104221

This paper proposes a novel way to study the casing structural integrity using two approaches of finite element analysis (FEA) and machine learning. The approach in this study is unique, as it captures the pertinent parameters influencing the casing... Read More about An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation..

Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCL. (2021)
Journal Article
PRAVEEN, B.M., ALHADHRAMI, A., PRASANNA, B.M., HEBBAR, N. and PRABHU, R. 2021. Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCl. Coatings [online], 11(8), article 965. Available from: https://doi.org/10.3390/coatings11080965

This study discusses the effects of temperature on corrosion inhibition for soft-cast steel by the pharmaceutically active drug olmesartan in 1 mol dm−3 HCl. The sufficient number of electron-rich elements and non-bonding π electrons in its structure... Read More about Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCL..

All Outputs (50)