All Outputs (121)

Predicting and identifying antimicrobial resistance in the marine environment using AI and machine learning algorithms. (2023)
Conference Proceeding
FOUGH, F., JANJUA, G., ZHAO, Y. and DON, A.W. 2023. Predicting and identifying antimicrobial resistance in the marine environment using AI and machine learning algorithms. In Proceedings of the 2023 IEEE (Institute of Electrical and Electronics Engineers) International workshop on Metrology for the sea (MetroSea 2023); learning to measure sea health parameters, 4-6 October 2023, La Valletta, Malta. Piscataway: IEEE [online], pages 121-126. Available from: https://doi.org/10.1109/MetroSea58055.2023.10317294

Antimicrobial resistance (AMR) is an increasingly critical public health issue necessitating precise and efficient methodologies to achieve prompt results. The accurate and early detection of AMR is crucial, as its absence can pose life-threatening r... Read More about Predicting and identifying antimicrobial resistance in the marine environment using AI and machine learning algorithms..

Tensile and impact properties of melt-blended nylon 6/ethylene-octene copolymer/graphene oxide nanocomposites. (2023)
Conference Proceeding
ATTAR, S., CHEN, B., CATALANOTTI, G. and FALZON, B.G. 2023. Tensile and impact properties of melt-blended nylon 6/ethylene-octene copolymer/graphene oxide nanocomposites. In Falzon, B.G. and McCarthy, C. (eds.) Proceedings of the 23rd International conference on composite materials 2023 (ICCM 23), 30 July - 04 August 2023, Belfast, Northern Ireland. Belfast: Queen's University Belfast. Hosted on ICCM-central [online], paper 253. Available from: http://www.iccm-central.org/Proceedings/ICCM23proceedings/index.htm

The addition of stiff nanoparticles to a polymer matrix usually proves beneficial for the enhancement in stiffness and strength, however, the impact strength is usually lowered. Conversely, the use of elastomeric additives can enhance the toughness a... Read More about Tensile and impact properties of melt-blended nylon 6/ethylene-octene copolymer/graphene oxide nanocomposites..

Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell. (2023)
Conference Proceeding
KURUSHINA, V., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., FAISAL, N., SOMAN, A., HORRI, B.A. and CAI, Q. 2023. Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell. In Proceedings of the 34th Thermal and fluid analysis workshop 2023 (TFAWS 2023), 21-25 August 2023, Maryland, USA. Washington: NASA [online], article number TFAWS23-ID-7. Available from: https://tfaws.nasa.gov/tfaws23/proceedings/

Technologies behind electrolysis cells for hydrogen production are making progress in terms of portability, cost reduction, performance enhancement, prolonged operation, and integration in stacks and with existing power infrastructure. The solid oxid... Read More about Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell..

A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges. (2023)
Journal Article
ATTEYA, A.I., ALI, D., HOSSAIN, M. and SELLAMI, N. 2023. A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges. Green energy and environmental technology [online], 2. Available from: https://doi.org/10.5772/geet.23

Green hydrogen is currently considered a key element for delivering free-carbon energy. This paper provides an extensive assessment of the potential of green hydrogen technology as a pathway to the low-carbon economy while highlighting the major tech... Read More about A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges..

Municipal solid waste air gasification using waste marble powder as a catalyst for syngas production. (2023)
Journal Article
AMIN, N., KHAN, Z., RAZZAQ, A., GHAURI, M., KHURRAM, S., INAYAT, A., JAFFERY, M. and HAMEED, Z. 2024. Municipal solid waste air gasification using waste marble powder as a catalyst for syngas production. Journal of the Energy Institute [online], 113, article number 101496. Available from: https://doi.org/10.1016/j.joei.2023.101496

Waste marble powder (WMP), the main pollutant in the marble processing industry, is predominantly composed of calcite. Its rich calcium-based nature, derived from calcite, positions it as an excellent source for a CO2 sorbent, making it highly conduc... Read More about Municipal solid waste air gasification using waste marble powder as a catalyst for syngas production..

Multiple decomposition-aided long short-term memory network for enhanced short-term wind power forecasting. (2023)
Journal Article
BALCI, M., DOKUR, E., YUZGEC, U. and ERDOGAN, N. [2024]. Multiple decomposition-aided long short-term memory network for enhanced short-term wind power forecasting. IET renewable power generation [online], Early View. Available from: https://doi.org/10.1049/rpg2.12919

With the increasing penetration of grid-scale wind energy systems, accurate wind power forecasting is critical to optimizing their integration into the power system, ensuring operational reliability, and enabling efficient system asset utilization. A... Read More about Multiple decomposition-aided long short-term memory network for enhanced short-term wind power forecasting..

Improved model order reduction techniques with error bounds. (2023)
Journal Article
BASHRAT, S., IMRAN, M., AKRAM, S., WAKEEL, A., BAIG, N.A. and UD-DIN, A.Z. 2024. Improved model order reduction techniques with error bounds. International journal of systems science [online], 55(4), pages 687-700. Available from: https://doi.org/10.1080/00207721.2023.2293683

This paper introduces two enhanced model order reduction techniques designed for scenarios involving frequency-weighted and frequency-limited-interval Gramians in the continuous-time domain. The primary objective is to address the instability issue i... Read More about Improved model order reduction techniques with error bounds..

Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. (2023)
Journal Article
VISWANATHAN, V., MCCLOSKEY, A., MATHUR, R., NGUYEN, D.T., FAISAL, N.H., PRATHURU, A., LLAVORI, I., MURPHY, A., TIWARI, A., MATTHEWS, A., AGRAWAL, A. and GOEL, S. 2024. Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. Mechanical systems and signal processing [online], 208, article number 111030. Available from: https://doi.org/10.1016/j.ymssp.2023.111030

Thermal spraying, an important industrial surface manufacturing process in sectors such as aerospace, energy and biomedical, remains a skill intensive process often involving multiple trial runs impacting the yield. The core research challenge in dig... Read More about Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing..

Advancing security in IoT-driven critical infrastructure: a focus on smart transportation system. (2023)
Journal Article
JIMOH, H.O., ABOLLE-OKOYEAGU, C.J., AHMED, M.O. and LAWAL, N.O. 2023. Advancing security in IoT-driven critical infrastructure: a focus on smart transportation system. American journal of engineering research [online], 12(12), pages 33-46. Available from: https://www.ajer.org/papers/Vol-12-issue-12/12123346.pdf

As new technological platforms such as the Internet of Things (IoT), blockchain, Artificial Intelligence (AI) and Machine Learning (ML) are gradually emerging and being integrated into critical infrastructures which are subjected to digital attacks.... Read More about Advancing security in IoT-driven critical infrastructure: a focus on smart transportation system..

Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. (2023)
Journal Article
CANN, C. and SAHARUDIN, M.S. 2023. Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. Journal of physics: conference series [online], 2643: proceedings of the 8th International conference on applications and design in mechanical engineering 2023 (ICADME 2023), 4-5 September 2023, Kuala Lumpur, Malaysia, article 012003. Available from: https://doi.org/10.1088/1742-6596/2643/1/012003

Severe and common injuries involving burns to the hands and wrists can often lead to permanent loss of motion. The issue is exacerbated by the delicate nature of tendons and muscles in the hands, along with the formation of scar tissue. While rehabil... Read More about Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies..

Enhancing brain tumor classification with transfer learning across multiple classes: an in-depth analysis. (2023)
Journal Article
AHMMED, S., PODDER, P., MONDAL, M.R.H., RAHMAN, S.M.A., KANNAN, S., HASAN, M.J., ROHAN, A. and PROSVIRIN, A.E. 2023. Enhancing brain tumor classification with transfer learning across multiple classes: an in-depth analysis. Biomedinformatics [online], 3(4), pages 1124-1144. Available from: https://doi.org/10.3390/biomedinformatics3040068

This study focuses on leveraging data-driven techniques to diagnose brain tumors through magnetic resonance imaging (MRI) images. Utilizing the rule of deep learning (DL), we introduce and fine-tune two robust frameworks, ResNet 50 and Inception V3,... Read More about Enhancing brain tumor classification with transfer learning across multiple classes: an in-depth analysis..

A summary of artificial lift failure, remedies and run life improvements in conventional and unconventional wells. (2023)
Journal Article
MAHDI, M.A.A., AMISH, M., OLUYEMI, G. and ABDULMONIEM, M. 2023. A summary of artificial lift failure, remedies and run life improvements in conventional and unconventional wells. International journal of innovative science and research technology [online], 8(11), pages 1589-1596. Available from: https://doi.org/10.5281/zenodo.10251115

Artificial lift (AL) systems are crucial for enhancing oil and gas production from reservoirs. However, the failure of these systems can lead to significant losses in production and revenue. This paper explores the different types of AL failures and... Read More about A summary of artificial lift failure, remedies and run life improvements in conventional and unconventional wells..

Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. (2023)
Presentation / Conference
AMINAHO, E. 2023. Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. Presented at the 2023 Sand Management Network (SMN) students annual competition, Aberdeen, UK, 29 November 2023.

This study aims to evaluate formation integrity during cyclic injection and withdrawal of CO2 gas stream and the impact of impurities in the CO2 gas stream on the petrophysics and brittleness of reservoir and caprock. It also aims to identify possib... Read More about Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions..

Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines. (2023)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. [2023]. Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines. Proceedings of the Institution of Mechanical Engineers, Part C: journal of mechanical engineering science [online], Online First. Available from: https://doi.org/10.1177/09544062231196986

Accurate prediction of the hydraulic effect of hydrate deposition and plug location is critical to the safety and operability of natural gas transport pipelines, especially for gas-dominant subsea pipelines where maintenance and intervention activiti... Read More about Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines..

AI safety of film capacitors. (2023)
Journal Article
ZHANG, Y.-X., CHEN, F.-Y., LIU, D.-F., WANG, J.-X., FENG, Q.-K., JIANG, H.-Y., WANG, X.-J., ZHAO, H.-B., ZHONG, S.-L., SHAH, F.M. and DANG, Z.-M. [2024]. AI safety of film capacitors. IET nanodielectrics [online], Early View. Available from: https://doi.org/10.1049/nde2.12071

With a large number of film capacitors being deployed in critical locations in electrical and electronic systems, artificial intelligence (AI) technology is also expected to address the problems encountered in this process. According to our findings,... Read More about AI safety of film capacitors..

Solar-powered adsorption-based multi-generation system working under the climate conditions of GCC countries: theoretical investigation. (2023)
Journal Article
EL-SHARKAWY, I.I., HASSAN, M., ABD-ELHADY, M.M., RADWAN, A. and INAYAT, A. 2023. Solar-powered adsorption-based multi-generation system working under the climate conditions of GCC countries: theoretical investigation. Sustainability [online], 15(22), article number 15851. Available from: https://doi.org/10.3390/su152215851

In this study, transient modelling for a solar-powered adsorption-based multi-generation system working under the climatic conditions of the Gulf Cooperation Council (GCC) countries is conducted. Three cities are selected for this study: Sharjah in t... Read More about Solar-powered adsorption-based multi-generation system working under the climate conditions of GCC countries: theoretical investigation..

Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs. (2023)
Presentation / Conference
AMINAHO, E.N. 2023. Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs. Presented at the UK Carbon Capture and Storage Research Community (UKCCSRC) flexible funding 2022 projects webinar, 9 November 2023, [virtual event].

This presentation gives an overview of the context and methodology of a project that aimed to identify suitable geological reservoirs for CO2 storage. The project was particularly focused on the issues of caprock integrity, and the assessment of how... Read More about Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs..

Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine. (2023)
Journal Article
MIAN, H.H., SIDDIQUI, M.S., YANG, L., KVAMSDAL, T. and ASIM, T. 2023. Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine. Journal of physics: conference series [online], 2626: proceedings from the 2023 EERA (European Energy Research Alliance) DeepWind conference, 18-20 January 2023, Trondheim, Norway, article 012073. Available from: https://doi.org/10.1088/1742-6596/2626/1/012073

The prolonged operation of wind turbines in harsh offshore environments leads to deterioration and roughness accumulation on the blade surface. This roughness, particularly on the leading edge and other surfaces, can affect the laminar-to-turbulent t... Read More about Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine..

Start-up dynamics of vertical axis wind turbines: a review. (2023)
Journal Article
LOUGH, J., ASIM, T., COULL, S., MARSHALL, A., ISLAM, S.Z. and AMBER, I. 2023. Start-up dynamics of vertical axis wind turbines: a review. Journal of physics: conference series [online], 2626: proceedings from the 2023 EERA (European Energy Research Alliance) DeepWind conference, 18-20 January 2023, Trondheim, Norway, article 012006. Available from: https://doi.org/10.1088/1742-6596/2626/1/012006

Vertical Axis Wind Turbines (VAWTs) are becoming increasingly popular for wind power extraction due to their simpler design, lower manufacturing and maintenance costs. The omni-directionality of these power generating machines make them more suitable... Read More about Start-up dynamics of vertical axis wind turbines: a review..

Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. (2023)
Journal Article
DAOUSH, W.M., AL-ZUAIR, A.F., SAHARUDIN, M.S. and INAM, F. [2023]. Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. Carbon letters [online], Online First. Available from: https://doi.org/10.1007/s42823-023-00630-z

Carbon fibers of polyacrylonitrile (PAN) type were coated with nickel nanoparticles using a chemical reduction method in alkaline hydrazine bath. The carbon fibers were firstly heated at 400°C and then chemically treated in hydrochloric acid followed... Read More about Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties..