Professor Nadimul Faisal's Outputs (34)

Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach. (2021)
Presentation / Conference Contribution
HAWEZ, H., SANAEE, R. and FAISAL, N.H. 2021. Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach. Presented at the 55th US rock mechanics/geomechanics American Rock Mechanics Association (ARMA) symposium, 18-25 June 2021, [virtual conference].

Numerical modelling of multiphase flow in naturally fractured reservoirs is a challenging issue for petroleum reservoir engineers. As a result of high degree heterogeneity in flow characteristics in fractured reservoirs, several mathematical, discret... Read More about Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach..

Coupled reservoir geomechanics and multiphase flow in fractured porous media. (2020)
Presentation / Conference Contribution
HAWEZ, H., SANAEE, R. and FAISAL, N. 2020. Coupled reservoir geomechanics and multiphase flow in fractured porous media. Presented at the 9th ETP (Energy Technology Partnership) annual conference 2020 (ETPAC20), 2-3 November 2020, [virtual event].

As a result of a rapid pressure reduction and lack of understanding of hydromechanical behaviour at the fracture matrix interface, a considerable amount of hydrocarbon reserves will remain in place in fractured reservoirs. Therefore, rigid numerical... Read More about Coupled reservoir geomechanics and multiphase flow in fractured porous media..

Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. (2019)
Presentation / Conference Contribution
CHIKERE, C., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2019. Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. Journal of physics: conference series [online], 1310: proceedings of 2018 Applied nanotechnology and nanoscience international conference (ANNIC 2018), 22-24 October 2018, Berlin, Germany, article ID 012008. Available from: https://doi.org/10.1088/1742-6596/1310/1/012008

Zinc oxide nanoparticles (nano-ZnO) was used to modify carbon paste electrode (CPE) for a fast and sensitive electrochemical determination of gallic acid (GA). The study was carried out using cyclic voltammetry (CV) and differential voltammetry (DPV)... Read More about Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid..

Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. (2018)
Presentation / Conference Contribution
FAISAL, N.H., SANAEE, R., SINGH, R.M., MURRAY, J., MCLAUGHLIN, A., HEALY, D. and LEE, T.-L. 2018. Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. Journal of physics: conference series [online], 1106: proceedings of the 2018 Modern practice in stress and vibration analysis (MPSVA 2018), 2-4 July 2018, Cambridge, UK, article ID 012011. Available from: https://doi.org/10.1088/1742-6596/1106/1/012011

Neutron scattering (at ENGIN-X) was used to examine strain distributions in two hydrocarbon reservoir rock types (i.e. sandstone and chalk) under uniaxial stress (up to 35 MPa) at temperature as high as 70 °C to utilise the advantages of neutron scat... Read More about Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression..

Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. (2018)
Presentation / Conference Contribution
CRAWFORD, A.R., DROUBI, M.G. and FAISAL, N.H. 2018. Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. Presented at the 33rd European Working Group on Acoustic Emission (EWGAE) European acoustic emission testing conference (EWGAE 2018), 12-14 September 2018, Senlis, France [online], pages 218-228. Available from: http://www.ewgae2018.com/wp-content/uploads/2018/09/EWGAE-Conference-Proceedings_2018-1.pdf

Acoustic emission (AE) testing has previously been demonstrated to be well suited to detecting failure in adhesively-bonded joints. In this work, the relationship between the fracture-mode of adhesively-bonded specimens and the acoustic wave-modes ex... Read More about Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints..

Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. (2018)
Presentation / Conference Contribution
OWOSENI, T., BAI, M., HUSSAIN, T., FAISAL, N.H., LEE, T.L. and KELLEHER, J. 2019. Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. In Azarmi, F., Balani, K., Eden, T., Hussain, T., Li, H., Shinoda, K. and Toma, F.-L. (eds.) Proceedings of the 2018 International thermal spray conference (ITSC 2018), 7-10 May 2018, Orlando, USA. Ohio: ASM International [online], pages 490-495. Available from: http://www.proceedings.com/47648.html

Thermally sprayed coatings have residual stresses due to the processing techniques where the particles go through thermal softening/melting, high velocity impact and rapid solidification. The nature and magnitude of residual stresses in these coating... Read More about Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings..

Application of acoustic emission to predict corrosion. (2017)
Presentation / Conference Contribution
DROUBI, M.G. and FAISAL, N.H. 2017. Application of acoustic emission to predict corrosion. In Proceedings of the 14th International conference of the Slovenian Society for Non-Destructive Testing: application of contemporary non-destructive testing in engineering (NDT-Slovenia 2017), 4-6 September 2017, Bernardin, Slovenia. Mayen: NDT.net [online], pages 271-278. Available from: https://www.ndt.net/article/ndt-slovenia2017/papers/271.pdf

Non-destructive testing (NDT) techniques used for petroleum pipelines and offshore wind-turbines can only detect corrosion after it has occurred. Therefore, intrusive inspections are required regularly, potentially causing disruption to operation and... Read More about Application of acoustic emission to predict corrosion..

Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. (2017)
Presentation / Conference Contribution
DROUBI, M.G., MCAFEE, J., HORNE, R.C., WALKER, S., KLAASSEN, C., CRAWFORD, A., PRATHURU, A.K. and FAISAL, N.H. 2017. Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. Procedia structural integrity [online], 5: proceedings of the 2nd International conference on structural integrity (ICSI 2017), 4-7 September 2017, Funchal, Portugal, pages 40-47. Available from: https://doi.org/10.1016/j.prostr.2017.07.059

Fracture behavior of adhesively bonded joints subjected to mixed-mode (i.e. mode I+II) loading conditions is of importance in many industrial applications. This research therefore aims to characterise the failure behaviour of metal-to-metal (i.e. bot... Read More about Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods..

Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. (2017)
Presentation / Conference Contribution
ALI, O., AHMED, R., ALAWADHI, H., SHAMEER, M., FAISAL, N., AL-ANAZI, N. and GOOSEN, M. 2017. Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. In Proceedings of the 2017 International thermal spray conference and exposition (ITSC 2017), 7-9 June 2017, Düsseldorf, Germany. Düsseldorf: DVS Media, pages 681-686.

WC-Co coatings were deposited using conventional High Velocity Oxy-Fuel Jet-Kote (HVOF-JK) and Suspension HVOF (S-HVOF) methods. Microstructural and mechanical properties along with the wear resistance of coatings were investigated. Reciprocating sli... Read More about Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders..

Characterization of hydroxyapatite layer on AISI 316L stainless steel. (2017)
Presentation / Conference Contribution
HLINKA, J., LASEK, S., SIOSTRZONEK, R. and FAISAL, N. 2017. Characterization of hydroxyapatite layer on AISI 316L stainless steel. In Proceedings of the 26th International conference on metallurgy and materials (METAL 2017), 24-26 May 2017, Brno, Czech Republic. Ostrava: Tanger, pages 1292-1297.

Bioactive coatings can be divided into two main groups - organic and inorganic coatings. Hydroxyapatite (HA) is well known as one of inorganic part of mammal's bone structure and is highly recommended for use in implantology. This paper is mainly foc... Read More about Characterization of hydroxyapatite layer on AISI 316L stainless steel..

Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. (2017)
Presentation / Conference Contribution
WATSON, G., STAROST, K., BARI, P., FAISAL, N., MISHRA, S. and NJUGUNA, J. 2016. Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012009. Available from: https://doi.org/10.1088/1757-899X/195/1/012009

In this study, nano-sized graphene oxide sheets were homogenously dispersed via sonication methods in epoxy followed by vacuum resin infusion for the fabrication of the epoxy, graphene oxide (GO) and micro-sized carbon fibre reinforced nanocomposites... Read More about Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites..

Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite. (2017)
Presentation / Conference Contribution
STAROST, K., FRIJNS, E., LAER, J.V., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., NELISSEN, I., BLAZQUEZ, M. and NJUGUNA, J. 2016. Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012011. Available from: https://doi.org/10.1088/1757-899X/195/1/012011

In this study, the effect on nanoparticle emissions due to drilling on Polypropylene (PP) reinforced with 20% talc, 5% montmorillonite (MMT) and 5% Wollastonite (WO) is investigated. The study is the first to explore the nanoparticle release from WO... Read More about Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite..

Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. (2016)
Presentation / Conference Contribution
DROUBI, M.G., FAISAL, N.H., STUART, A., MOWAT, J., NOBEL, C. and EL-SHAIB, M.N. 2016. Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. In Proceedings of the 32nd European conference on acoustic emission testing (EWGAE 2016), 7-9 September 2016, Prague, Czech Republic. Bad Breisig: NDT.net [online], pages 95-104. Available from: http://www.ndt.net/article/ewgae2016/papers/95_paper.pdf

Composite sandwich structures consisting of two layers with an adhesive contacting interface are of importance in a number of industrial applications such as aerospace, marine and automotive. This research therefore aims to characterise the failure b... Read More about Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths..

Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings. (2015)
Presentation / Conference Contribution
AHMED, R., FAISAL, N.H., ALI, O., AL-ANAZI, N.M., AL-MUTAIRI, S., MAMOUR, S., POLYCHRONIADIS, E.K. and GOOSEN, M.F.A. 2015. Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings. In Polychroniadis, E.K., Oral, A.Y. and Ozer, M. (eds.) Proceedings of the 2nd International multidisciplinary microscopy and microanalysis congress 2014 (InterM), 16-19 October 2014, Oludeniz, Turkey. Springer proceedings in physics, 164. Cham: Springer [online], pages 31-38. Available from: https://doi.org/10.1007/978-3-319-16919-4_5

Microstructural and sliding wear evaluations of nanostructured coatings deposited by Suspension High Velocity Oxy-Fuel (S-HVOF) spraying were conducted in as-sprayed and HIPed (Hot Isostatically Pressed) conditions. S-HVOF coatings were nanostructure... Read More about Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings..