Skip to main content

Research Repository

Advanced Search

SYAFAWATI HASBI's Outputs (12)

Design and fabrication of a simple device for folding towel. (2024)
Journal Article
HANIFFAH, N.A., KAMAL, M.S.M. and HASBI, S. 2024. Design and fabrication of a simple device for folding towel. Journal of advanced research in applied sciences and engineering technology [online], 44(2), pages 221-233. Available from: https://doi.org/10.37934/araset.44.2.221233

Electronic technology makes work more manageable, and various electronic gadgets have been invented to assist humans. One of the most time-consuming activities is household chores, such as laundry. Daily laundry tasks are easier to manage with the he... Read More about Design and fabrication of a simple device for folding towel..

Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. (2023)
Journal Article
HASBI, S., LEONG, K.Y., KU AHMAD, K.Z., ABDUL RAHIM, N. and SAHARUDIN, M.S. 2023. Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. International journal of automotive and mechanical engineering [online], 20(1), pages 10247-10257. Available from: https://doi.org/10.15282/ijame.20.1.2023.07.0792

In this study, a eutectic mixture of coconut oil (CO)-capric acid (CA) was synthesised and investigated with the aim of producing newly eutectic phase change materials (PCMs) with improved thermal properties as thermal energy storage (TES). Although... Read More about Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage..

Advances in sustainable nanocomposites. (2023)
Journal Article
SAHARUDIN, M.S., ILYAS, R.A., AWANG, N., HASBI, S., SHYHA, I. and INAM, F. 2023. Advances in sustainable nanocomposites. Sustainability [online], 15(6), article number 5125. Available from: https://doi.org/10.3390/su15065125

Advances in Sustainable Nanocomposites is a newly opened Special Issue of Sustainability, which aims to publish original and review papers on the new scientific development of sustainable nanocomposite materials that are accelerated by zero-carbon po... Read More about Advances in sustainable nanocomposites..

The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., OKOLO, C., WEI, J. and JUSOH, A.R. 2019. The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. Journal of engineering science and technology [online], 14(6), pages 3131-3142. Available from: https://tinyurl.com/57nrhehp

Epoxy/multi-layer graphene nanocomposites prepared with different acetone dosages (0 ml, 25 ml and 50 ml) were successfully produced. This study investigates the effectiveness of short-term dispersion and small dosages of acetone on the properties of... Read More about The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties..

The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., ZULKIFLI, A. and ZAILANI, N.F. 2019. The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. International journal of innovative technology and exploring engineering [online], 9(1), pages 5440-5444. Available from: https://doi.org/10.35940/ijitee.A8105.119119

Four different types of nanocomposites were successfully produced using solution casting technique. Graphene was dispersed in four different ethanol concentrations; 0g, 1g, 2.5g, and 5g. In general, it can be observed that ethanol is an excellent age... Read More about The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties..

Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. (2019)
Journal Article
SAHARUDIN, M.S., ATIF, R., HASBI, S., NAZRI, M.N.A., SAIDIN, N.U. and ABDULLAH, Y. 2019. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. AIMS materials science [online], 6(6), pages 900-910. Available from: https://doi.org/10.3934/matersci.2019.6.900

The synergistic effects of halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) on the mechanical properties of epoxy nanocomposites were investigated. The addition of hybrid nanofillers (0.5 wt% HNTs-0.5 wt% CNTs) has significantly increased the... Read More about Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites..

Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites. (2018)
Journal Article
SAHARUDIN, M.S., HASBI, S., RASHID, N.M. and NORDIN, M.S.J. 2018. Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites. Journal of engineering science and technology [online], 13(12), pages 4226-4239. Available from: https://tinyurl.com/5n687hym

The influence of short-term water absorption on the mechanical properties of Multi-Layer Graphene (MLG) and Multi-Walled Carbon Nanotubes (MWCNTs) reinforced epoxy hybrid nanocomposites were studied. Water absorption test was conducted by immersing s... Read More about Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites..

Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage.
Presentation / Conference Contribution
HASBI, S., NORAZMAN, N. and SAHARUDIN, M.S. 2023. Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. Materials today: proceedings [online], 75(1): proceedings of the 2022 Innovative manufacturing, mechatronics and material forum (iM3F 2022), pages 181-187. Available from: https://doi.org/10.1016/j.matpr.2022.11.426

Biobased phase change materials (BPCMs) have attracted much attention as they offer proper melting temperature, high heat capacity, non-corrosive, low cost, and are abundantly available. However, the BPCMs have a low thermal conductivity which limits... Read More about Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage..

Tensile and corrosion resistance studies of MXenes/nanocomposites: a review.
Presentation / Conference Contribution
SAHARUDIN, M.S., CHE NASIR, N.A. and HASBI, S. 2022. Tensile and corrosion resistance studies of MXenes/nanocomposites: a review. In Ismail, A., Dahalan, W.M. and Öchsner A. (eds.). Design in maritime engineering: contributions from the 2nd International conference on marine and advanced technologies 2021 (ICMAT 2021), 24 August 2021, [virtual conference]. Advanced structured materials, 167. Cham: Springer [online], pages 189-198. Available from: https://doi.org/10.1007/978-3-030-89988-2_14

MXenes are a relatively new and interesting class of two-dimensional materials with diverse compositions and outstanding characteristics such as dispersibility and metallic conductivity. MXenes appear to be promising fillers for polymer nanocomposite... Read More about Tensile and corrosion resistance studies of MXenes/nanocomposites: a review..

Recent advances in MXene composites research, applications and opportunities.
Presentation / Conference Contribution
SAHARUDIN, M.S., AYUB, A., HASBI, S., MUHAMMAD-SUKKI, F., SHYHA, I. and INAM, F. [2023]. Recent advances in MXene composites research, applications and opportunities. Materials today: proceedings [online], In Press. Proceedings of the 2022 Composite sciences and technology international conference (COMSAT2022), 22-23 August 2022, Johor, Malaysia. Available from: https://doi.org/10.1016/j.matpr.2023.02.435

MXene composites have emerged as a promising class of materials due to their exceptional properties and versatility in various applications. In recent years, researchers have made significant progress in the development and characterization of MXene... Read More about Recent advances in MXene composites research, applications and opportunities..

A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia.
Presentation / Conference Contribution
YAU, Y.H. and HASBI, S. 2017. A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia. Energy procedia [online], 143: proceedings of the 2017 World engineers summit joint conference of applied energy symposium and forum and low carbon urban energies (WES-CUE 2017), 18-21 July 2017, Singapore, pages 295-300. Available from: https://doi.org/10.1016/j.egypro.2017.12.687

In an earlier paper [1], the authors had comprehensively reviewed the climate change impacts for commercial buildings and their technical services in the tropics, and it revealed that numerous studies have been conducted to assess the climate change... Read More about A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia..

Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol.
Presentation / Conference Contribution
SAHARUDIN, M.S., HASBI, S., OKOLO, C. and INAM, F. 2021. Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. IOP conference series: materials science and engineering [online], 1072: proceedings of the 2020 Joint international conference of the 2nd International conference on industrial and system engineering (IConISE) and the 7th Annual conference on industrial and system engineering (ACISE), 22-23 July 2020, Surabaya, Indonesia, article 012009. Available from: https://doi.org/10.1088/1757-899X/1072/1/012009

In this research, solution casting technique was applied to produce four types of nanocomposites. Different ethanol dosages; 0g, 1g, 3g, and 5g were used to disperse graphene in the epoxy matrix. It was observed that 1g dosage of ethanol was the most... Read More about Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol..