Outputs (39)

Overcoming CD spectroscopy sample preparation challenges in protein structural analysis for biosimilars. (2024)
Working Paper
AGBELUSI, T., PANCHOLI, K., KUMAR, H.S. and KUMAR, A. 2024. Overcoming CD spectroscopy sample preparation challenges in protein structural analysis for biosimilars. Preprints [online]. Available from: https://doi.org/10.20944/preprints202401.0441.v1

Circular dichroism (CD) spectroscopy is a valuable tool in the pharmaceutical industry for determining the secondary and tertiary structure, folding, stability, and interactions of proteins in biosimilars. However, protein aggregation due to its inte... Read More about Overcoming CD spectroscopy sample preparation challenges in protein structural analysis for biosimilars..

Manganese catalysed synthesis of polyketones using hydrogen borrowing approach. (2024)
Working Paper
KULYABIN, P., MAGDYSYUK, O., NADEN, A.B., DAWSON, D.M., PANCHOLI, K., WALKER, M., VASSALLI, M. and KUMAR, A. 2024. Manganese catalysed synthesis of polyketones using hydrogen borrowing approach. ChemRxiv [online]. Available from: https://doi.org/10.26434/chemrxiv-2023-8lv3v-v2

We report here a new method to make polyketones from the coupling of diketones and diols using a manganese pincer complex. The methodology allows us to access a new type of polyketone (polyarylalkylketone) containing aryl, alkyl, and ether functional... Read More about Manganese catalysed synthesis of polyketones using hydrogen borrowing approach..

Enhancement of infrared absorption through a patterned thin film of magnetic field and spin-coating directed self-assembly of gold nanoparticle stabilised ferrofluid emulsion. (2023)
Journal Article
OKPOZO, P., DWIVEDI, Y., HUO, D. and PANCHOLI, K. 2023. Enhancement of infrared absorption through a patterned thin film of magnetic field and spin-coating directed self-assembly of gold nanoparticle stabilised ferrofluid emulsion. RSC advances [online], 13(34), pages 23955-23966. Available from: https://doi.org/10.1039/d3ra01369c

Molecular vibration signals were amplified by the gold strip gratings as a result of grating resonances and nearby electric field hotspots. Colloidal gold island films exhibit similar enhancement; however, the uneven geometrical characteristics of th... Read More about Enhancement of infrared absorption through a patterned thin film of magnetic field and spin-coating directed self-assembly of gold nanoparticle stabilised ferrofluid emulsion..

Investigation on mechanical and thermal properties of 3D-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions. (2023)
Journal Article
ICHAKPA, M., GOODYEAR, M., DUTHIE, J., DUTHIE, M., WISELY, R., MACPHERSON, A., KEYTE, J., PANCHOLI, K. and NJUGUNA, J. 2023. Investigation on mechanical and thermal properties of 3d-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions. Journal of composites science [online], 7(6), article 227. Available from: https://doi.org/10.3390/jcs7060227

This study is focused on 3D printing of polyamide 6 (PA6), PA6/graphene oxide (PA6/GO) and PA6/glass-fibre-reinforced (PA6/GF) composites. The effect of graphene oxide and glass-fibre reinforcement on 3D-printed PA6 is explored for improvement of the... Read More about Investigation on mechanical and thermal properties of 3D-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions..

The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea. (2023)
Journal Article
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Artic sea. Journal of composites science [online], 7(6), article 212. Available from: https://doi.org/10.3390/jcs7060212

Flexible risers have proven to be a popular choice for deepwater exploration due to their ability to withstand functional and environmental stress while maintaining system integrity. In the challenging arctic conditions, lightweight hybrid composite... Read More about The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea..

Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset] (2023)
Dataset
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Arctic sea. [Dataset]. Journal of composites science [online], 7(6), article 212. Available from: https://www.mdpi.com/article/10.3390/jcs7060212/s1

The harsh and extreme conditions in the Arctic region pose new challenges for the technologies and standards established for traditional open water fields, as they may not be suitable for developments in ice-covered waters. Due to the unique challeng... Read More about Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset].

Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset] (2023)
Dataset
GUPTA, R., PANCHOLI, P.V., YU, X., GUPTA, L., STENNING, G.B.G., BUCKNALL, D., FLYNN, D. and PANCHOLI, K. 2023. Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset]. Nano-structures and nano-objects [online], 34, article number 100973. Available from: https://tinyurl.com/47tkuzks

Induction heating of magnetic nanoparticles (MNPs) and localised melting of the surrounding high temperature engineering polymer matrix by generating microscopic or macroscopic eddy currents during magnetisation of a polymer nanocomposite (PMC) is cr... Read More about Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset].

Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. (2023)
Journal Article
GUPTA, R., PANCHOLI, P.V., YU, X., GUPTA, L., STENNING, G.B.G., BUCKNALL, D., FLYNN, D. and PANCHOLI, K. 2023. Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. Nano-structures and nano-objects [online], 34, article number 100973. Available from: https://doi.org/10.1016/j.nanoso.2023.100973

Induction heating of magnetic nanoparticles (MNPs) and localised melting of the surrounding high temperature engineering polymer matrix by generating microscopic or macroscopic eddy currents during magnetisation of a polymer nanocomposite (PMC) is cr... Read More about Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating..

Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion. [Dataset] (2023)
Dataset
OKPOZO, P., DWIVEDI, Y., HUO, D. and PANCHOLI, K. 2023. Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion. [Dataset]. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1724749

These data have been produced as part of a research project that aimed to develop a method for the preparation of a magnetically-directed self-assembly of gold Pickering ferrofluid emulsion, with the goal of enhancing infrared absorption from the mol... Read More about Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion. [Dataset].

Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion. (2023)
Working Paper
OKPOZO, P., DWIVEDI, Y., HUO, D. and PANCHOLI, K. 2023. Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion. Hosted on OpenAIR [online]. Available from: https://rgu-repository.worktribe.com/output/1759908

The molecular vibration signals were amplified by the gold strip gratings as a result of grating resonances and nearby electric field hotspots. Colloidal gold island films exhibit similar enhancement; however, the uneven geometrical characteristics o... Read More about Exploring the enhancement of infrared absorption through magnetically guided assembly of gold nanoparticle stabilized ferrofluid emulsion..

Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film. (2023)
Journal Article
OKPOZO, P. and PANCHOLI, K. 2023. Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film. Hybrid advances [online], 2, article 100018. Available from: https://doi.org/10.1016/j.hybadv.2023.100018

The magnetic field directed self-assembly of the nanoparticles is cheap, fast and easy method to prepare the patterned thin film useful for various applications. However, the dipole-dipole interaction between nanoparticles at the interface generates... Read More about Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film..

Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film. [Dataset] (2023)
Dataset
OKPOZO, P. and PANCHOLI, K. 2023. Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film. [Dataset]. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1848943

Aim is to study the spatial organisation of the magnetically directed gold pickering ferrofluid emulsion via spin coating. The magnetically directed self-assembly manufacturing technique was successfully applied by combining the magnetic field and sp... Read More about Study of spatial organisation of magnetic field directed gold-pickering-ferrofluid-nanoemulsion in spin coated film. [Dataset].

Magnetic field directed self-assembly of gold Pickering emulsion for preparing patterned film. (2022)
Thesis
OKPOZO, O.P. 2022. Magnetic field directed self-assembly of gold Pickering emulsion for preparing patterned film. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1987909

Patterning plays a vital in role in sensor-based devices like surface-enhanced Raman spectroscopy (SERS), surface-enhanced infrared absorption (SEIRA), radio frequency (RF) antennas and many others. The linear array spacing and width of gold strips h... Read More about Magnetic field directed self-assembly of gold Pickering emulsion for preparing patterned film..

Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment. (2022)
Journal Article
NAMMI, S.K., GUPTA, R. and PANCHOLI, K. [2022]. Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment. Proceedings of the Institution of Mechanical Engineers, Part E: journal of process mechanical engineering [online], OnlineFirst. Available from: https://doi.org/10.1177/09544089221144394

The hybrid flexible risers have a multi-layered structure and use thermoplastic composite for the pressure and tensile armour. In contrast, a conventional flexible riser uses heavier carbon steel as armour which significantly contributes to its weigh... Read More about Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment..

Tuneable magnetic nanocomposites for remote self-healing. (2022)
Journal Article
GUPTA, R., GUPTA, P., FOOTER, C., STENNING, G.B.G., DARR, J.A. and PANCHOLI, K. 2022. Tuneable magnetic nanocomposites for remote self-healing. Scientific reports [online], 12, article 10180. Available from: https://doi.org/10.1038/s41598-022-14135-8

When polymer composites containing magnetic nanoparticles (MNPs) are exposed to an alternating magnetic field, heat is generated to melt the surrounding polymer locally, partially filling voids across any cracks or deformities. Such materials are of... Read More about Tuneable magnetic nanocomposites for remote self-healing..

Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. (2022)
Journal Article
GUPTA, R., NJUGUNA, J. and PANCHOLI, K. 2022. Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. Journal of composites science [online], 6(3), article 83. Available from: https://doi.org/10.3390/jcs6030083

Polymer components capable of self-healing can rapidly be manufactured by injecting the monomer (ε-caprolactam), activator and catalyst mixed with a small amount of magnetic nanoparticles into a steel mould. The anionic polymerisation of the monomer... Read More about Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component..

Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset] (2022)
Dataset
GUPTA, R., NJUGUNA, J. and PANCHOLI, K. 2022. Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset]. Journal of composites science [online], 6(3), article 83. Available from: https://www.mdpi.com/2504-477X/6/3/83/s1

This paper discusses the effect of the catalyst and the activator concentrations on the properties of polymerised PA6-PMC containing 1 wt% uncoated MNPs. The focus herein is to tune the degree of crystallinity of the prepared PA6-PMC for the optimum... Read More about Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset].

Tuneable magnetic nanocomposites for remote self-healing? [Dataset] (2022)
Dataset
GUPTA, R., FOOTER, C., STENNING, G., DARR, J. and PANCHOLI, K. [2022]. Tuneable magnetic nanocomposites for remote self-healing? [Dataset]. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1579700

The aim of this research is to develop a method to prepare a multiferroic-Polyamide 6 (PA6) nanocomposite with tuneable magnetocaloric properties for self-healing structure. It was shown that maintaining the low interaction radius through the dispers... Read More about Tuneable magnetic nanocomposites for remote self-healing? [Dataset].

A review of sensing technologies for non-destructive evaluation of structural composite materials. (2021)
Journal Article
GUPTA, R., MITCHELL, D., BLANCHE, J., HARPER, S., TANG, W., PANCHOLI, K., BAINES, L., BUCKNALL, D.G. and FLYNN, D. 2021. A review of sensing technologies for non-destructive evaluation of structural composite materials. Journal of composites science [online], 5(12), article 319. Available from: https://doi.org/10.3390/jcs5120319

The growing demand and diversity in the application of industrial composites and the current inability of present non-destructive evaluation (NDE) methods to perform detailed inspection of these composites has motivated this comprehensive review of s... Read More about A review of sensing technologies for non-destructive evaluation of structural composite materials..

Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures. (2021)
Thesis
GUPTA, R. 2021. Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1987943

Self-healing materials have the ability to repeatedly repair damages that occur before complete failure of materials. The development of stimuli-responsive self-healing materials has been in demand recently for composite structures, since their failu... Read More about Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures..

Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. (2021)
Journal Article
GUPTA, R., BADEL, B., GUPTA, P., BUCKNALL, D.G., FLYNN, D. and PANCHOLI, K. 2021. Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. ACS applied nano materials [online], 4(3), pages 2413-2422. Available from: https://doi.org/10.1021/acsanm.0c02719

Polymer–nanoparticle composites prepared using a low-density polyethylene (LDPE) matrix with BaTiO3 nanoparticle compositions of 6, 9, 12, and 15 wt % have shown insulating behavior and are evaluated for their applicability as flexible strain sensors... Read More about Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment..

Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset] (2021)
Dataset
GUPTA, R., BADEL, B., GUPTA, P., BUCKNALL, D.G., FLYNN, D. and PANCHOLI, K. 2021. Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset]. ACS applied nano materials [online], 4(3), pages 2413-2422. Available from: https://pubs.acs.org/doi/suppl/10.1021/acsanm.0c02719/suppl_file/an0c02719_si_001.pdf

Prepared film sample and their testing setup is included in Section S1 of Supporting Information, TEM images of the uncoated and silica-coated BaTiO3 NPs along with the TEM images of the uncoated BaTiO3 polymer NP sample and all the polymer–NP compos... Read More about Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset].

Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. (2020)
Journal Article
GUPTA, R., SMITH, L., NJUGUNA, J., DEIGHTON, A. and PANCHOLI, K. 2020. Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. ACS applied electronic materials [online], 2(7), pages 1880-1891. Available from: https://doi.org/10.1021/acsaelm.0c00052

A polymer–metal oxide nanocomposite is a key in developing a high-temperature insulation material for power electronics and high-voltage direct current (HVDC) and medium-voltage direct current (MVDC) subsea cables having the capability of transmittin... Read More about Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables..

Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. (2020)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and ALZAHRANI, B. 2020. Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International journal of advanced manufacturing technology [online], 107(7-8), pages 3169-3183. Available from: https://doi.org/10.1007/s00170-020-05190-4

This paper investigates the effect of graphene nano-platelet (GNP) content (%weight fraction) on the machinability of epoxy/GNP nanocomposites. The machinability of nanocomposites with varying loadings of GNP content was evaluated experimentally thro... Read More about Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites..

Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. (2019)
Journal Article
GUPTA, R., STAKEVICIUS, R. and PANCHOLI, K. 2019. Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. Procedia CIRP [online], 85: proceedings of 2nd CIRP conference on composite material parts manufacturing (CIRP-CCMPM 2019), 10-11 October 2019, Sheffield, UK, pages 61-65. Available from: https://doi.org/10.1016/j.procir.2019.10.003

Currently, mass composite manufacturing is dominated by the fiber-reinforced thermosets due to the ease of its processing. However, the addition of multifunctionality to the thermoset composite requires an additional step of manufacturing. This work... Read More about Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite..

Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. (2019)
Journal Article
KEYTE, J., PANCHOLI, K. and NJUGUNA, J. 2019. Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. Frontiers in materials [online], 6, article ID 224. Available from: https://doi.org/10.3389/fmats.2019.00224

The two-dimensional macro molecule graphene and its derivatives have widely been investigated for their application as nanofiller in carbon fibre-reinforced composites (CFRC). Research has progressed from techniques that simply mix graphene as a mixi... Read More about Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites..

Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset] (2019)
Dataset
FAISAL, N., LEE, T.L., KELLEHER, J., SANAEE, R. and PANCHOLI, K. 2019. Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.RB1920741-1

The exploitation of unconventional remote geological resources, such as those in Arctic formations, requires engineering designs that withstand the temperatures and pressures encountered. In a previous experiment (RB1810235, April 2018) comparing san... Read More about Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset].

Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. (2019)
Journal Article
GUPTA, R., HUO, D., WHITE, M., JHA, V., STENNING, G.B.G. and PANCHOLI, K. 2019. Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. Composites communications [online], 16, pages 67-78. Available from: https://doi.org/10.1016/j.coco.2019.08.014

Continuous fibre reinforced thermoplastic composites are increasingly finding their use as engineering materials in many industries due to the excellent fire, smoke and toxicity performance. However, the composite component produced using automated c... Read More about Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications..

Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite. (2019)
Journal Article
GUPTA, R., PANCHOLI, K., DE SA, R., MURRAY, D., HUO, D., DROUBI, G., WHITE, M. and NJUGUNA, J. 2019. Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite. JOM [online], 71(9), pages 3119-3128. Available from: https://doi.org/10.1007/s11837-019-03622-5

This work reports the development and testing of a magnetic polymer (Polyamide 6, PA6) nanocomposite capable of melting when exposed to an external magnetic field. Addition of high concentrations of iron oxide nanoparticles (NPs) can induce quick mel... Read More about Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite..

Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. (2019)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and SAHARUDIN, M.S. 2019. Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. Nanomaterials [online], 9(7), article number 917. Available from: https://doi.org/10.3390/nano9070917

Efficient machining of the polyester nanocomposite components requires a better understanding of machinability characteristics of such material, which has become an urgent requirement for modern industrial production. In this research, the micro-mill... Read More about Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites..

Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. (2018)
Journal Article
PANCHOLI, K., ROBERTSON, P.K.J., OKPOZO, P., BEATTIE, N.S. and HUO, D. 2019. Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. Journal of physics: energy [online], 1(1), article ID 015007. Available from: https://doi.org/10.1088/2515-7655/aaec3d

This paper reports for the first time the observation of stimulated emissions from the gas–liquid interface between two adjacent bubbles in highly ordered foams containing Rhodamine 6 G and surfactant. Stimulated emissions centred at 595 nm were obse... Read More about Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces..

Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. [Dataset] (2018)
Dataset
PANCHOLI, K. 2018. Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. [Dataset]

Insulating polymer nanocomposites for high thermal conduction and fire retarding applications. (2017)
Presentation / Conference
GUPTA, R., HUO, D., PANCHOLI, M., NJUGUNA, J. and PANCHOLI, K. 2017. Insulating polymer nanocomposites for high thermal conduction and fire retarding applications. Presented at the 3rd Defence and security doctoral symposium, 14-15 November 2017, Swindon, UK [online]. Available from: https://doi.org/10.17862/cranfield.rd.5675281.v1

The possibility of combining the flexibility and light - weight of polymers with the highest insulation of ceramics, drives the field of nanocomposites for potential commercial application. The inclusion of nano-sized insulating particles in the poly... Read More about Insulating polymer nanocomposites for high thermal conduction and fire retarding applications..

Self-healing polymer nanocomposites for composite structure applications. (2017)
Presentation / Conference
GUPTA, R., JHA, V., LATTO, J., PANCHOLI, M., HUO, D. and PANCHOLI, K. 2017. Self-healing polymer nanocomposites for composite structure applications. Presented at the 3rd Defence and security doctoral symposium, 14-15 November 2017, Swindon, UK [online]. Available from: https://doi.org/10.17862/cranfield.rd.5675281.v1

Nanocomposites offer the possibility of realizing materials with bespoke properties that were un-realizable by the parent pristine materials. Since, nanoscale inclusions firstly engender small mechanical, electrical and optical defects; and secondly... Read More about Self-healing polymer nanocomposites for composite structure applications..

Integrated self-healing of the composite offshore structures. (2017)
Conference Proceeding
GUPTA, R., PANCHOLI, K., PRABHU, R., PANCHOLI, M., HUO, D., JHA, V. and LATTO, J. 2017. Integrated self-healing of the composite offshore structures. In Proceedings of OCEANS 2017, 19-22 June 2017, Aberdeen, UK. New York: IEEE [online], article number 8084828, pages 1514-1517. Available from: https://doi.org/10.1109/OCEANSE.2017.8084828

The self-repairing composite materials integrated with sensing is way forward to reduce maintenance cost and increase consumer safety. In this work, the novel self-healing carbon fibre reinforced unidirectional bulk tape of simple architecture is pre... Read More about Integrated self-healing of the composite offshore structures..

Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle. (2016)
Journal Article
MALIK, R., PANCHOLI, K. and MELZER, A. 2016. Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle. Nanobiomedicine [online], 3, pages 1-8. Available from: https://doi.org/10.1177/1849543516670806

Liposome–microbubble conjugates are considered as better targeted drug delivery vehicles compared to microbubbles alone. The microbubble in the integrated drug delivery system delivers the drug intracellularly on the target, whereas the liposome comp... Read More about Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle..

High yielding microbubble production method. (2016)
Journal Article
FIABANE, J., PRENTICE, P. and PANCHOLI, K. 2016. High yielding microbubble production method. BioMed research international [online], article ID 3572827. Available from: https://doi.org/10.1155/2016/3572827

Microfluidic approaches to microbubble production are generally disadvantaged by low yield and high susceptibility to (micro)channel blockages. This paper presents an alternative method of producing microbubbles of 2.6 m mean diameter at concentratio... Read More about High yielding microbubble production method..

A novel method of producing microbubbles for targeted drug delivery. (2016)
Thesis
FIABANE, J. 2016. A novel method of producing microbubbles for targeted drug delivery. Robert Gordon University, PhD thesis.

Microbubbles, currently employed in diagnostic ultrasound as a contrast agent, have a potential new application as vehicles for targeted drug delivery, which could revolutionise medicine by eliminating side-effects. A new device is developed which ou... Read More about A novel method of producing microbubbles for targeted drug delivery..

Surface and subsurface characterisation in micro-milling of monocrystalline silicon. (2015)
Journal Article
HUO, D., LIN, C., CHOONG, Z.J., PANCHOLI, K. and DEGENAAR, P. 2015. Surface and subsurface characterisation in micro-milling of monocrystalline silicon. International journal of advanced manufacturing technology [online], 81(5-8), pages 1319-1331. Available from: https://doi.org/10.1007/s00170-015-7308-7

This paper presents an experimental investigation on surface and subsurface characterisation of micro-machined single-crystal silicon with (100) orientation. Full immersion slot milling was conducted using solid cubic boron nitride (CBN) and diamond-... Read More about Surface and subsurface characterisation in micro-milling of monocrystalline silicon..