Outputs (1243)

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2023)
Presentation / Conference
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., RAJENDRAN, V., CAI, Q., HORRI, B. and KUMAR, A. 2023. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 1st IUT (Islamic University of Technology) International conference on mechanical, material and production engineering 2023 (IUT-ICMMPE 2023), 21-22 July 2023, Gaziput, Dhaka.

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

Precise dynamic modelling of real-world hybrid solar-hydrogen energy systems for grid-connected buildings. (2023)
Journal Article
ATTEYA, A.I., ALI, D. and SELLAMI, N. 2023. Precise dynamic modelling of real-world hybrid solar-hydrogen energy systems for grid-connected buildings. Energies [online], 16(14), article 5449. Available from: https://doi.org/10.3390/en16145449

Hybrid renewable hydrogen energy systems could play a key role in delivering sustainable solutions for enabling the Net Zero ambition; however, the lack of exact computational modelling tools for sizing the integrated system components and simulating... Read More about Precise dynamic modelling of real-world hybrid solar-hydrogen energy systems for grid-connected buildings..

Hydrogen and the energy transition. (2023)
Presentation / Conference
ALI, D. 2023. Hydrogen and the energy transition. Presented at the 2023 Glasgow Caledonia University (GCU) Capacity building Erasmus+ workshop, 12 July 2023, Sri Lanka.

To justify and know why we need to use Hydrogen the author detailed the emission briefs which showed the emissions from natural gas decreased by 118 Mt in 2022 due to Ukraine war, coal grew to a new all-time high of all-time high of almost 15.5 Gt. E... Read More about Hydrogen and the energy transition..

Advances in structural analysis and process monitoring of thermoplastic composite pipes. (2023)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Advances in structural analysis and process monitoring of thermoplastic composite pipes. Heliyon [online], 9(7), e17918. Available from: https://doi.org/10.1016/j.heliyon.2023.e17918

Thermoplastic composite pipes (TCP) in comparison to other pipes have proven beneficial features due to its flexibility which includes being fit for purpose, lightweight and no corrosion. However, during the manufacturing of TCP which involves the co... Read More about Advances in structural analysis and process monitoring of thermoplastic composite pipes..

Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline. (2023)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. 2023. Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline. Gas science and engineering [online], 116, article number 205048. Available from: https://doi.org/10.1016/j.jgsce.2023.205048

The continuous flow assurance in subsea gas pipelines relies heavily on the assessment of temperature profile during hydrate sloughing and pipewall shedding caused by hydrates, with similar implications for carbon dioxide (CO2) transportation under h... Read More about Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline..

Impacts of annealing temperature and time on the thermoelectric performance of recycled carbon fiber (RCF)/n-Bi2Te3 heterostructure thermoelectric composites. (2023)
Journal Article
JAGADISH, P., KHALID, M., WONG, W.P., PHEI LI. L., CHELVANATHAN, P., WALVEKAR, R., MUBARAK, N.M. and CHAN, A. 2023. Impacts of annealing temperature and time on the thermoelectric performance of recycled carbon fiber (RCF)/n-Bi2Te3 heterostructure thermoelectric composites. ECS journal of solid state science and technology [online], 12(6), article number 061004. Available from: https://doi.org/10.1149/2162-8777/acdd98

Recycling carbon fibre waste is crucial for sustainability in the composites industry. Herein, we report the fabrication of a heterostructure composite using recycled carbon fiber (RCF) and n-type bismuth telluride (n-Bi2Te3) for thermoelectric appli... Read More about Impacts of annealing temperature and time on the thermoelectric performance of recycled carbon fiber (RCF)/n-Bi2Te3 heterostructure thermoelectric composites..

Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. (2023)
Journal Article
ALI, O., AHMED, R., TOMA, F.-L., BERGER, L.-M., MATTHEY, B., FAISAL, N. and AHMED, K. 2023. Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. Journal of thermal spray technology [online], 32(7), pages 2028-2053. Available from: https://doi.org/10.1007/s11666-023-01597-z

Suspension thermal spraying is an emerging coating technology that enables the deposition of dense-structured ceramic coatings. As wear resistance is a main application field of alumina (Al2O3) coatings, this study aimed to evaluate the dry reciproca... Read More about Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear..

Developing a virtual engineering lab using ADDIE model. (2023)
Journal Article
AMISH, M. and JIHAN. S. 2023. Developing a virtual engineering lab using ADDIE model. Journal of e-learning research [online], 2(1), pages 50-69. Available from: https://doi.org/10.33422/jelr.v2i1.417

In recent years, digital competence has become essential at the workplace. There is a growing demand for engineers with both employability and digital skills. As a result of the technological advancements, the Virtual Laboratory (VLab) concept was cr... Read More about Developing a virtual engineering lab using ADDIE model..

Development of predictive optimization model for autonomous rotary drilling system using machine learning approach. (2023)
Journal Article
AMADI, K., IYALLA, I., PRABHU, R., ALSABA, M. and WALY, M. 2023. Development of predictive optimization model for autonomous rotary drilling system using machine learning approach. Journal of petroleum exploration and production technology [online], 13(10), pages 2049-2062. Available from: https://doi.org/10.1007/s13202-023-01656-9

The growing global energy demand and strict environmental policies motivate the use of technology and performance improvement techniques in drilling operations. In the traditional drilling method, the effort and time required to optimize drilling dep... Read More about Development of predictive optimization model for autonomous rotary drilling system using machine learning approach..

Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis. (2023)
Journal Article
AL BISHTAWI, B., SOO, Y.H., CHAN, A.T.Y. and SCRIBANO, G. 2023. Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis. European journal of mechanics - B/Fluids [online], 101, pages 176-194. Available from: https://doi.org/10.1016/j.euromechflu.2023.05.009

Atherosclerosis is a disease clinically categorized as a silent killer as its symptoms only become pronounced after the buildup has extensively progressed. Therefore, early detection, prediction and treatment become of great priority. The focus of th... Read More about Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis..