All Outputs (62)

The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. (2021)
Journal Article
HASSANI, F., FAISAL, N.H., NISH, R., ROTHNIE, S. and NJUGUNA, J. 2022. The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. Journal of petroleum science and engineering [online], 208(part B), article 109200. Available from: https://doi.org/10.1016/j.petrol.2021.109200

Hydrogenated nitrile butyl rubber (HNBR) elastomers are highly resistant to chemicals and degradation, and they are good candidates to be adopted in aggressive environmental conditions of high temperature and pressure. As these service parameters are... Read More about The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications..

Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. (2021)
Journal Article
FAISAL, N.H., SELLAMI, N., VENTURI, F., HUSSAIN, T., MALLICK, T., MUHAMMAD-SUKKI, F., BISHOP, A., UPADHYAYA, H., KATIYAR, N.K. and GOEL, S. 2021. Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent materials [online], 4(6), pages 1619-1633. Available from: https://doi.org/10.1007/s42247-021-00252-z

Metamaterials, an artificial periodic two- or three-dimensional configuration can change propagation characteristics of electromagnetic waves (i.e., reflection, transmission, absorption). The current challenges in the field of metamaterial coatings a... Read More about Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation..

Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. (2021)
Journal Article
FAISAL, N.H., FOWLIE, A., CONNELL, J., MACKENZIE, S., NOBLE, R. and PRATHURU, A.K. 2022. Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. Journal of strain analysis for engineering design [online], 57(5), pages 377-391. Available from: https://doi.org/10.1177/03093247211027085

Helical Auxetic Yarns (HAYs) can be used in a variety of applications, from healthcare to blast and impact resistance. This work focuses on the effect of the use of different core materials (e.g. rubber, polyurethane, polytetrafluoroethylene/teflon,... Read More about Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn..

Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. (2021)
Journal Article
HOSSAIN, M. and FAISAL, N.H. 2021. Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. AIP advances [online], 11(4), article 045111. Available from: https://doi.org/10.1063/5.0042952

In this paper, we investigate the aerosol cloud flow physics during three respiratory actions by humans (such as coughing, talking, and breathing). With given variables (i.e., velocity, duration, particle size and number of particles, and ambient con... Read More about Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions..

Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. (2021)
Journal Article
BALOGUN, Y., IYI, D., FAISAL, N., OYENEYIN, B., OLUYEMI, G. and MAHON, R. 2021. Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. Journal of petroleum science and engineering [online], 203, article ID 108645. Available from: https://doi.org/10.1016/j.petrol.2021.108645

Relative permeability is affected by several flow parameters, mainly the operating temperature and fluid viscosity. Fluid viscosities change with temperature, which correspondingly affects the relative permeability. Temperature is believed to have a... Read More about Experimental investigation of the effect of temperature on two-phase oil-water relative permeability..

Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. (2021)
Journal Article
IYI, D., BALOGUN, Y., OYENEYIN, B. and FAISAL, N. 2021. Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. Journal of petroleum science and engineering [online], 201, article ID 108453. Available from: https://doi.org/10.1016/j.petrol.2021.108453

A numerical investigation into the effect of wettability and temperature on oil recovery with a hot water injection at different temperatures is reported in this paper. The computational domain is a two-dimensional porous medium (reservoir) maintaine... Read More about Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level..

Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes. (2020)
Journal Article
CHIKERE, C.O., HOBBEN, E., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2021. Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes. Microchemical journal [online], 160(part B), article ID 105668. Available from: https://doi.org/10.1016/j.microc.2020.105668

Beverages like wines, have exhibited a high level of antioxidant capacity, specifically from compounds like Gallic acid (GA) and their derivatives. GA has shown great importance in the food industry and pharmaceutical industry as a food additive, ant... Read More about Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes..

Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity. (2020)
Journal Article
ALDOASRI, M.A., ALSAUD, K.B.B., OTHMAN, A., AL-HINDAWI, M., FAISAL, N.H., AHMED, R., MICHAEL, F.M., KRISHNAN, M.R. and ALSHARAEH, E. 2020. Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity. Polymers [online], 12(5), article ID 1155. Available from: https://doi.org/10.3390/polym12051155

Herein, we report a facile process for the preparation of styrene and methyl-methacrylate copolymer nanocomposites containing reduced graphene oxide and silver nanoparticles ((R-(GO-(PS-PMMA))/AgNPs)) by using (i) microwave irradiation (MWI) to obtai... Read More about Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity..

Interaction between amorphous zirconia nanoparticles and graphite: electrochemical applications for gallic acid sensing using carbon paste electrodes in wine. (2020)
Journal Article
CHIKERE, C.O., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2020. Interaction between amorphous zirconia nanoparticles and graphite: electrochemical applications for gallic acid sensing using carbon paste electrodes in wine. Nanomaterials [online], 10(3), article ID 537. Available from: https://doi.org/10.3390/nano10030537

Amorphous zirconium oxide nanoparticles (ZrO2) have been used for the first time, to modify carbon paste electrode (CPE) and used as a sensor for the electrochemical determination of gallic acid (GA). The voltammetric results of the ZrO2 nanoparticle... Read More about Interaction between amorphous zirconia nanoparticles and graphite: electrochemical applications for gallic acid sensing using carbon paste electrodes in wine..

Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. (2019)
Journal Article
CHIKERE, C., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2019. Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. Journal of physics: conference series [online], 1310: proceedings of 2018 Applied nanotechnology and nanoscience international conference (ANNIC 2018), 22-24 October 2018, Berlin, Germany, article ID 012008. Available from: https://doi.org/10.1088/1742-6596/1310/1/012008

Zinc oxide nanoparticles (nano-ZnO) was used to modify carbon paste electrode (CPE) for a fast and sensitive electrochemical determination of gallic acid (GA). The study was carried out using cyclic voltammetry (CV) and differential voltammetry (DPV)... Read More about Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid..

Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades. (2019)
Journal Article
DROUBI, M.G., FOSBROOKE, C., MCCONNACHIE, J. and FAISAL, N.H. 2019. Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades. SN applied sciences [online], 1(7), article ID 691. Available from: https://doi.org/10.1007/s42452-019-0735-6

Wind turbine is a source of non-polluting renewable energy. Whether a wind turbine is viable depends entirely on the structural integrity of turbine blade. To assess the structural integrity of wind turbine blades it is necessary to investigate the l... Read More about Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades..

The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing. (2019)
Journal Article
CHIKERE, C.O., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2019. The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing. Journal of solid state electrochemistry [online], 23(6), pages 1795-1809. Available from: https://doi.org/10.1007/s10008-019-04267-9

For the first time, the synergistic effect of graphene oxide nanocolloids (nano-GO) and silicon dioxide (silica) nanoparticles (SiO2-nanoparicles) has been used to modify a glassy carbon electrode (GCE) for the determination of gallic acid (GA). The... Read More about The synergistic effect between graphene oxide nanocolloids and silicon dioxide nanoparticles for gallic acid sensing..

Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. (2018)
Journal Article
FAISAL, N.H., SANAEE, R., SINGH, R.M., MURRAY, J., MCLAUGHLIN, A., HEALY, D. and LEE, T.-L. 2018. Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. Journal of physics: conference series [online], 1106: proceedings of the 2018 Modern practice in stress and vibration analysis (MPSVA 2018), 2-4 July 2018, Cambridge, UK, article ID 012011. Available from: https://doi.org/10.1088/1742-6596/1106/1/012011

Neutron scattering (at ENGIN-X) was used to examine strain distributions in two hydrocarbon reservoir rock types (i.e. sandstone and chalk) under uniaxial stress (up to 35 MPa) at temperature as high as 70 °C to utilise the advantages of neutron scat... Read More about Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression..

Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. (2018)
Journal Article
AHMED.R., VOURLIAS, G., ALGOBURI, A., VOGIATZIS, C., CHALIAMPALIAS, D., SKOLIANOS, S., BERGER, L.-M., PAUL, S., FAISAL, N.H., TOMA, F.-L., AL-ANAZI, N.M and GOOSEN, M.F.A. 2018. Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. Journal of thermal spray technology [online], 27(8), pages 1579-1593. Available from: https://doi.org/10.1007/s11666-018-0775-2

Corrosion properties of nanostructured coatings deposited by suspension high-velocity oxy-fuel (S-HVOF) via an aqueous suspension of milled WC-Co powder were compared with conventional HVOF-sprayed coatings. Microstructural evaluations of these coati... Read More about Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock..

Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. (2018)
Journal Article
FAISAL, N.H., MANN, L., DUNCAN, C., DUNBAR, E., CLAYTON, M., FROST, M., MCCONNACHIE, J., FARDAN, A. and AHMED, R. 2019. Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. Surface and coatings technology [online], 357, pages 497-514. Available from: https://doi.org/10.1016/j.surfcoat.2018.10.053

In firsts of its investigation, a diametral compression destructive testing method (also known as Brazilian test) was performed on thermally sprayed coated and uncoated circular disc specimens to compare relative surface stresses. The coating investi... Read More about Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens..

Future of nanoindentation in archaeometry. (2018)
Journal Article
FAISAL, N.H., AHMED, R., GOEL, S. and CROSS, G. 2018. Future of nanoindentation in archaeometry. Journal of materials research [online], 33(17), pages 2515-2532. Available from: https://doi.org/10.1557/jmr.2018.280

This review aims to consolidate scarce literature on the use of modern nanomechanical testing technique like instrumented nanoindentation in the field of archaeometry materials research. The review showcase on how can the nanoindentation tests provid... Read More about Future of nanoindentation in archaeometry..

Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. (2018)
Journal Article
CRAWFORD, A., DROUBI, M.G. and FAISAL, N.H. 2018. Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. Journal of nondestructive evaluation [online], 37(2), article number 33. Available from: https://doi.org/10.1007/s10921-018-0488-y

Acoustic emission (AE) monitoring shows promise as one of the most effective methods for condition monitoring of adhesively-bonded joints. Previous research has demonstrated its ability to detect, locate and classify adhesive joint failure, though in... Read More about Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints..

Corrosion properties of anodized titanium. (2017)
Journal Article
HLINKA, J., LASEK, S. and FAISAL, N. 2017. Corrosion properties of anodized titanium. Acta metallurgica Slovaca [online], 23(3), pages 270-275. Available from: https://doi.org/10.12776/ams.v23i3.982

In this paper corrosion properties and microstructure features of amorphous self-organised TiO2 nanotubes electrochemically deposited on titanium are discussed. There was titanium of second grade used as a substrate for these experiments. There was a... Read More about Corrosion properties of anodized titanium..

Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. (2017)
Journal Article
DROUBI, M.G., MCAFEE, J., HORNE, R.C., WALKER, S., KLAASSEN, C., CRAWFORD, A., PRATHURU, A.K. and FAISAL, N.H. 2017. Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. Procedia structural integrity [online], 5: proceedings of the 2nd International conference on structural integrity (ICSI 2017), 4-7 September 2017, Funchal, Portugal, pages 40-47. Available from: https://doi.org/10.1016/j.prostr.2017.07.059

Fracture behavior of adhesively bonded joints subjected to mixed-mode (i.e. mode I+II) loading conditions is of importance in many industrial applications. This research therefore aims to characterise the failure behaviour of metal-to-metal (i.e. bot... Read More about Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods..

Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., BLAZQUEZ, M., NELISSEN, I. and NJUGUNA, J. 2017. Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. Journal of hazardous materials [online], 340, pages 57-66. Available from: https://doi.org/10.1016/j.jhazmat.2017.06.057

The risk assessment, exposure and understanding of the release of embedded carbon nanotubes (CNTs) and carbon nanofibers (CNFs) from commercial high performance composites during machining processes is yet to be fully evaluated and quantified. In thi... Read More about Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites..